2-34
Maintenance Utilities
VU-ACD™/100 Maintenance Guide - Host/DOS
2.6.1.1 DMS Node Configuration
Step
Prompt
Action
1
For PAD Connection
VIEW/MODIFY DMS NODE CONFIGURATION
1) Node Description
DMS-100
2) PAD Type
MEMOTEC
3) Port
/dev/ttyi1A
4) Baud Rate
9600
5) BCS version number
35
6) Network Protocol version NOP1
7) User id
USER ID
8) User password
USER PW
9) Pool name
POOL NAME
10) Pool password
POOL PW
11) Subpool name
SUBPOOL NAME
12) Subpool number
0
13) Subpool password
SUBPOOL PW
For LAN Connection
VIEW/MODIFY DMS NODE CONFIGURATION
1) Node Description
DMS-100
2) Connection Type
LAN
3) TCP/IP Port ID
1111
4) DMS-100 IP Address
151.101.0.1
5) BCS version number
35
6) Network Protocol version NOP1
7) User id
USER ID
8) User password
USER PW
9) Pool name
POOL NAME
10) Pool password
POOL PW
11) Subpool name
SUBPOOL NAME
12) Subpool number
0
13) Subpool password
SUBPOOL PW
Select a parameter to modify or "q" to quit:
Type the number corresponding to the con-
figuration parameter you wish to change and
press
Enter
.
?
Steps below describe the procedures for changing each parameter listed in the Modify
Configuration Menu.
2
1)Node Description
DMS-100
Type
1
and press
Enter
to change the Node
Description.
Enter the Node Description: [ ]
Type a descriptive name for this node (up to 20
alphanumeric characters) and press
Enter.
?
If you are using a Serial connection to the DMS-100 follow Steps 2 - 7 and then continue with
Step 14. If you are using a
LAN
connection to the DMS-100 follow Steps 8 -13 and then
continue with Step 14.
For PAD Connection
3
2) PAD Type
Type
2
and press
Enter
.
4
MODIFY DMS NODE CONFIGURATION
for Node <n>
The PADs supported are:
1)
MEMOTEC
2)
CX800
3)
DCA
4)
LAN
Select option 1 if using a Memotec PAD
Select the type of PAD:[ ]
Type the number corresponding to the type of
PAD/Connection used in this system and press
Enter
.
If you selected
4) LAN
continue with Step 10.
-or-
All other options proceed with next Step.
The View/Modify DMS Node Configuration
Menu reappears.
Choose another configuration parameter to
change or proceed to Step 32.
5
3) Port
Type
3
and press
Enter
to change the Port
assignment.
