manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Руководство по обслуживанию

Поделиться
Скачать
Perimeter Technology VU-ACD /100 Скачать руководство пользователя страница 130

4-10

Troubleshooting

VU-ACD™/100 Maintenance Guide – Host/DOS

4.2.1.1

NOS_QUANTITY_OF_SVCS

Purpose

The 

NOS_QUANTITY_OF_SVCS

 office parameter specifies the number of switched virtual circuits

(SVC) in a DMS-100.  This value directly affects the number of processes that can operate on a switch,
since there are as many incoming and outgoing tasks as there are SVCs.

Provisioning

The number of applications that require SVCs determine the number of SVCs needed.

NOS_QUANTITY_OF_SVCS

 has the following range of values:

•

Minimum

0

SVCs

•

Maximum

60

SVCs

•

Default

5

SVCs

Activation

Activation requires a warm restart.

4.2.1.2

ACD_MIS_OUT_EVENT_BUFFER_SIZE

Purpose

The 

ACD_MIS_OUT_EVENT_BUFFER_SIZE

 office parameter determines the actual size of the outgoing

buffer that is allocated for ACD MIS sessions.  The outgoing buffer stores replies and requests that are
made by the ACD MIS downstream processor (VU-ACD/100).

Provisioning

If 

ACD_MIS_OUT_EVENT_BUFFER_SIZE

 is set to the maximum value of 200, the buffer can contain up

to 150 queued replies and requests.  If the buffer is underprovisioned, event messages are discarded when
an attempt is made to add a message to a full queue.

?

Any non-zero value in register 

MISLOST

 of the 

ACDMISPL OM

 group indicates under-

provisioning.

If the buffer is overprovisioned, excessive data store is allocated in the DMS-100.

ACD_MIS_OUT_EVENT_BUFFER_SIZE

 has the following range of values:

•

Minimum

100

•

Maximum

200

•

Default

110

Memory Requirements

The following formula determines the memory requirements for an ACD MIS.

Number of Simultaneous ACD MIS Application Sessions X

(2400 + [Value of ACD+MIS_OUT_EVENT_BUFFER_SIZE x 48])

Activation

Do not change this parameter during an active session.  The new buffer size is allocated as soon as a
session is logged in.

Содержание VU-ACD /100

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды