2-52
Maintenance Utilities
VU-ACD™/100 Maintenance Guide – Host/DOS
Install A Tape Drive
(continued)
Step
Prompt
Action
18
Tape Drive Configuration Program
1. Configure a SCSI or Enhanced IDE tape drive
2. Configure a different type of tape drive
Select an option or enter q to quit:
Type
q
and press
Enter
.
19
You must create a new kernel to effect the driver change you specified.
Do you wish to create a new kernel now? (y/n)
Type
y
and press
Enter
.
20
The UNIX Operating System will now be rebuilt.
This will take a few minutes. Please wait.
Root for this system build is /.
The UNIX Kernel has been rebuilt.
Do you want this kernel to boot by
default? (y/n)
Backing up unix to unix.old
Installing new unix on the boot file
system
Type
y
and press
Enter
.
21
The kernel environment includes device node files and /etc/inittab.
The new kernel may require changes to /etc/inittab or device nodes.
Do you want the kernel environment
rebuilt? (y/n)
The kernel has been successfully linked
and installed.
To activate it, reboot your system.
Setting up new kernel environment
Type
y
and press
Enter
.
22
In order for the changes to be reflected on your emergency boot floppy set, it is
recommended that you run the command ‘/etc/mkdev fd’ and re-create the emergency boot
floppy set with the newly linked kernel.
Press <ENTER> when ready
Press
Enter
.
23
SYSTEM HARDWARE CONFIGURATION
1) Node Configuration
2) Maintenance Modem Configuration
3) Tape Configuration
4) Multiport Serial I/O Configuration
5) System Printer Configuration
6) Reset All External Displays
Select an option or ‘q’ to quit:
Type
q
and press
Enter
.
