2-10
Maintenance Utilities
VU-ACD™/100 Maintenance Guide – Host/DOS
2.2.1
Complete System Backup
This menu option copies all VU-ACD/100 data and executable files from the host hard disk and stores
them on a tape cartridge. Executing this option overwrites the entire contents of the tape. To restore files
backed up with this option, use the Complete System Restore option, described in Section 2.2.2.
!
To avoid possible file corruption during the system backup process, you
must shut down the ACD MIS.
!
Always use the maximum size tape cartridge supported by your tape drive
when performing a Complete System Backup.
Step
Prompt
Action
1
MAINTENANCE MENU
1) Shut Down ACD MIS
2) Shut Down ACD MIS & UNIX System
3) Tape Backup/Restore Utilities
4) System Logs
5) Load Management Limits
6) Change Maintenance Logon Password
7) System Hardware Configuration
8) Install a Software Update
9) Request Switch Initialization
10) 5ESS Provisioning
11) List Logged-In Users
Select an option, or enter q to quit:
Type
1
and press
Enter
to select Shut Down
ACD MIS. Refer to Section 2.1.2.1 for add-
itional information on the shutdown process.
2
MAINTENANCE MENU
1) Shut Down ACD MIS
2) Shut Down ACD MIS & UNIX System
3) Tape Backup/Restore Utilities
4) System Logs
5) Load Management Limits
6) Change Maintenance Logon Password
7) System Hardware Configuration
8) Install a Software Update
9) Request Switch Initialization
10) 5ESS Provisioning
11) List Logged-In Users
Select an option, or enter q to quit:
Type
3
and press
Enter
to select Tape Backup/-
Restore Utilities.
3
TAPE BACKUP/RESTORE UTILITIES
1) Complete System Backup
2) Complete System Restore
3) List of Contents on Tape
4) Extract Specific files from Tape
Select an option or enter q to quit:
Type
1
and press
Enter
to select Complete
System Backup.
