5
Caution
If the parameter identification is required, pay attention to the danger of injury
arising from the rotating motor. Otherwise accident may occur.
Do not change the factory settings at will. Otherwise it may damage the
equipment.
During the Operation
Warning
Do not touch the fan, heat sink or discharge resistor to sense the temperature.
Otherwise, you may get burnt.
Detection of signals during the operation shall only be conducted by qualified
technician. Otherwise, personal injury or equipment damage may be caused.
Caution
Do not control run/stop by using contactor. Or equipment damage may be
caused!
Avoid anything falling into the equipment when inverter is running. Or damage
may be caused.
Maintenance
Warning
Do not perform professional training personnel Do not carry out maintenance
and maintenance of the inverter. Otherwise it is personal injury or equipment
damage!
Do not charge the equipment for repair and maintenance. Otherwise there is
danger of electric shock!
After confirming that the input power of the inverter is de-energized for 10
minutes, the drive can be maintained and serviced. Otherwise the residual
charge on the capacitor will cause harm to people!
All pluggable plug-ins must be plugged in the case of power failure!
After the Inverter is replaced, the parameters must be set and checked.
2. Product Information
2.1 Name rule
Figure 2-1 Name rule
DSI-200 – 004G3/5K5P3
