Oriental motor EMP400 Series, Руководство по эксплуатации

Страница: 27 / 116

7 Writing and editing a sequence program
－
27
－
7.3.2.
How to start HyperTerminal
1.
Switch off the power to the controller.
2.
Connect the controller’s CN2 with your PC using the optional
FC04W5
communication
cable (purchased separately).
3.
Start the PC.
4.
Click on the “Start,” “Program,” “Accessories,” “Communication” and “HyperTerminal” icons
to start HyperTerminal.
5.
Type in a name for the connection (e.g.
EMP401
), then select an icon and click “OK.”
6.
In a typical connection method you may select the communication port you have previously
verified as described in section “Verifying the communication method,” on p.26 and click
“OK.”