Oriental motor EMP400 Series, Руководство по эксплуатации

Страница: 46 / 116

7 Writing and editing a sequence program
－
46
－
7.6 List of messages associated with sequence program
The messages listed below may be displayed while writing, editing, downloading or uploading a
sequence program.
An error message will appear if any invalid command or parameter is entered while editing a sequence
program.
If an error message is displayed, go back to enter the A, I or D command again.
Message Description
Can not Overwrite You cannot overwrite an existing sequence program.
>> Command: Enter a command.
Completed. Downloading/uploading has been completed.
Delete line n (Y/N)? The nth line will be deleted.
Empty…Direct Insert Mode. (ESC/Q = exit) The sequence program is empty. A new program may
be written.
End “ TEXT CAPTURE ” Stop Text Capture of HyperTerminal.
Insert line n The nth line will be inserted.
Invalid value. An invalid parameter has been entered for the
command you want to change or insert.
Line dose not exist. The line you want to change/insert/delete does not
exist.
Press ENTER key. Press the Enter key.
Select: Ax, Ix, or Dx (Alt/Ins/Del/Q = exit) Select the command for editing.
Select upload Sequence No. 0-31, 99, A
(0-31, 99, ALL)? Select the sequence program you want to upload.
Start DOWNLOAD Start sending the text file via HyperTerminal.
Start “ TEXT CAPTURE ” Start Text Capture of HyperTerminal.
Syntax error. The command you want to change or insert is invalid.