Oriental motor EMP400 Series, Руководство по эксплуатации

Страница: 87 / 116

10 Controlling with the operational unit
－
87
－
How to connect
Connection and disconnection of the operational unit must be performed before powering up the
controller.
Note
Be sure to turn on the controller power with the operational unit connected. To
disconnect the operational unit, turn off the controller power and then unplug the
cable. Connecting the operational unit with the controller power on will result in an
error and the unit cannot be used.
Plug the supplied cable’s modular connectors into the connector port
on the operational unit and the CN2 terminal on the controller.
When disconnecting the cable, pull out the cable while lightly
pushing the tab on the modular connector.
Connector jack
Note
Be sure to use the cable provided. A communication cable for connecting to a PC
(
FC04W5
) cannot be connected to the operational unit.
Removing the operational unit
1.
Pull the cable’s modular connector out of the
operational unit.
2.
To remove the unit, squeeze in the four hooks on
the top and bottom of the back of the operational
unit at the same time while pressing the unit
toward the front.
Hook