Oriental motor EMP400 Series, Руководство по эксплуатации

Страница: 29 / 116

7 Writing and editing a sequence program
－
29
－
7.3.3.
How to exit HyperTerminal
1.
Exit HyperTerminal.
A message appears, asking if you want to disconnect.
2.
Click “Yes.”
A message appears, asking if you want to save the settings.
3.
Click “Yes.”
The settings are saved and an icon is created.
EMP401
Memo Saving of the settings is required only after the initial connection.
For subsequent connections, you may start HyperTerminal simply by double-clicking the
icon.
7.4 Write a sequence program
7.4.1.
Writing a program with a line editor
HyperTerminal (Windows application) can be used as a line editor to write a sequence program.
While using HyperTerminal, command inputs to HyperTerminal are saved to the controller in real time.
1.
See section 7.3 “Starting and exiting HyperTerminal” on p.26, to connect the controller with
your PC and start HyperTerminal.