![background image](http://html1.mh-extra.com/html/omron/nj501-4300/nj501-4300_manual_742408299.webp)
6 - 95
6 Troubleshooting
NJ-series NJ Robotics CPU Unit User’s Manual (W539)
6-2
Er
ro
r Descript
ion
6
6-
2-2 Err
or D
escriptions
Event name
Invalid Tool Number
Event code
54015732 hex
Meaning
The tool ID specified for the
ToolID
input variable to a motion control instruction is out of range or not
defined.
Source
PLC Function Module
Source details
Instruction
Detection
timing
At instruction
execution
Error
attributes
Level
Observation
Recovery
---
Log category
System
Effects
User program
Continues
Operation
The relevant instruction will end according to specifi-
cations.
System-
defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Correction
Prevention
ToolID
is outside the setting
range.
Change the value of the
ToolID
input variable to a correct tool ID.
Set the tool ID correctly for the
ToolID
input variable.
The specified tool ID is not defined
by the MC_DefineToolTransform
(Define Tool Coordinate) instruc-
tion.
Define the tool with the MC_De-
fineToolTransform (Define Tool
Coordinate) instruction.
Define the tool and use it.
Attached
information
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number from
the start of the section is given. For ST, the line number is given.
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If there
is more than one possible instruction, information is given on all of them. Nothing is given if the instruction
cannot be identified.
Attached Information 4: Expansion Error Code (
ErrorIDEx
)
Precautions/
Remarks
If a program is changed after an error occurs, the attached information that is displayed may not be correct.
Event name
Tool Parameter Out of Range
Event code
54015733 hex
Meaning
The transform parameter specified for the
ToolTransform
input variable to a motion control instruction is out
of range.
Source
PLC Function Module
Source details
Instruction
Detection
timing
At instruction
execution
Error
attributes
Level
Observation
Recovery
---
Log category
System
Effects
User program
Continues
Operation
The relevant instruction will end according to specifi-
cations.
System-
defined
variables
Variable
Data type
Name
None
---
---
Cause and
correction
Assumed cause
Correction
Prevention
The transform parameter is out-
side the setting range.
Change the value of the
Tool-
Transform
input variable to a cor-
rect transform parameter.
Set the transform parameter cor-
rectly for the
ToolTransform
input
variable.
Attached
information
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number from
the start of the section is given. For ST, the line number is given.
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If there
is more than one possible instruction, information is given on all of them. Nothing is given if the instruction
cannot be identified.
Attached Information 4: Expansion Error Code (
ErrorIDEx
)
Precautions/
Remarks
If a program is changed after an error occurs, the attached information that is displayed may not be correct.
Содержание NJ501-4300
