Omron NJ501-4300, Руководство пользователя

Страница: 293 / 336

6 - 89
6 Troubleshooting
NJ-series NJ Robotics CPU Unit User’s Manual (W539)
6-2
Er
ro
r Descript
ion
6
6-
2-2 Err
or D
escriptions
Event name Trajectory Transition Out of Range Event code 54015716 hex
Meaning TrajTransition specified for the TrajData input variable to a motion control instruction is out of range.
Source
PLC Function Module
Source details
Instruction Detection
timing At instruction
execution
Error
attributes
Level
Observation
Recovery
---
Log category
System
Effects User program
Continues
Operation
The relevant instruction will end according to specifi-
cations.
System-
defined
variables Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
TrajTransition is outside the set-
ting range.
Correct the value of TrajTransition
of the TrajData input variable.
Set the trajectory transition cor-
rectly.
Attached
information
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number from
the start of the section is given. For ST, the line number is given.
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If there
is more than one possible instruction, information is given on all of them. Nothing is given if the instruction
cannot be identified.
Attached Information 4: Expansion Error Code (
ErrorIDEx )
Precautions/
Remarks If a program is changed after an error occurs, the attached information that is displayed may not be correct.
Event name Trajectory Travel Distance Out of Range Event code 54015717 hex
Meaning TrajDistance specified for the TrajData input variable to a motion control instruction is out of range.
Source
PLC Function Module
Source details
Instruction Detection
timing At instruction
execution
Error
attributes
Level
Observation
Recovery
---
Log category
System
Effects User program
Continues
Operation
The relevant instruction will end according to specifi-
cations.
System-
defined
variables Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
TrajDistance is outside the setting
range.
Correct the value of TrajDistance
of the TrajData input variable.
Set the trajectory travel distance
correctly.
Attached
information
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number from
the start of the section is given. For ST, the line number is given.
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If there
is more than one possible instruction, information is given on all of them. Nothing is given if the instruction
cannot be identified.
Attached Information 4: Expansion Error Code (
ErrorIDEx )
Precautions/
Remarks If a program is changed after an error occurs, the attached information that is displayed may not be correct.