Olympus Fluoview FV1000, Руководство пользователя

Страница: 519 / 540

Maintenance of Major System Units
/Laser Scanning Microscope
MAINTENANCE
2 - 1
Page
2 Maint enance of Major System Units
This section describes the maintenance of the Microscope.
2-1 Laser Sca nning Microscope
According to IEC60825 “Safety of Laser Product” and IEC60825(EN60825), this product is a
CLASS 3B laser product. Therefore, all of activities such as attachment or removal of the
microscope modules listed below are defined as the service activities.
I In the United States of America, this product is classified as a CLASS b laser product
according to the CDRH laser safety regulation, and attachment or removal of the
microscope modules listed below is not permitted as part of user maintenance activities.
(Such attachment and removal should be performed as part of service activities.)
For detailed imformation, refer to our service representatives.
1) Transmitted lamp housing
2) Transmitted light fiber cable
3) Cube turret of reflected light fluorescence unit
4) Objective revolving nosepiece
5) Objectives
6) Condenser
7) Differential interference slider
8) Excitation filter, spectral filter and barrier filter(Inside the scan unit)
The definitions of the term “maintenance” by IEC(EN60825) are quoted below for reference.
EN60825
Maintenance:
The performance of those adjustments or procedures specified in user information provided
by the manufacturer with the laser product, which are to be performed by the user for the
purpose of assuring the intended performance of the product. It does not include operation
or service.