Niko 550-00001, Руководство по установке

Страница: 79 / 140

78
12. Gateway
12. Gateway
Description
The Niko Home Control installation is connected to the Internet via the gateway to ensure that the remote control service
can be used. This service allows end-users to safely operate their Niko Home Control installation remotely, using the
smartphone or tablet application — available for Android and iOS operating systems — via mobile networks, such as
3G, GPRS or a WiFi hotspot.
Overview
Operation
The gateway is fitted with an RJ45 port to establish a connection with the IP interface. Use an ethernet cable to connect
this port with the Niko Home Control IP interface.
The gateway is powered separately and does not include a sliding contact. This allows you to add the gateway anywhere
in the electrical cabinet.
The gateway includes a second RJ45 port, which serves as a WAN port. Use an ethernet cable to connect this port with
the local router and to establish a connection with the Internet.
A. WAN-port Connect an ethernet cable to this RJ45 port to
connect the module with the local router and to
establish a connection with the Internet.
B. USB-ports These USB ports are currently not required for the use
of the remote control service.
C. L/N screw terminals This is where the 230V mains voltage is connected
using the connector.
D. IP interface port Connect the ethernet cable (supplied) to this RJ45
port to connect the module with the IP interface of the
Niko Home Control installation.
E. SERVICE button This button is used during the registration process.
The steps to be taken by the end-user are explained
via the portal of the remote control service.
F. GATEWAY LED Provides information on the module status.
G. SERVER LED Provides information on the server status.
550-00580
A
F
G
E
D
C
B