Niko 550-00001, Руководство по установке

Страница: 81 / 140

80
12. Gateway
6 Remember to give the end-user the information listed on the sticker or to place the sticker in a clearly visible
location on the gateway or inside the electrical cabinet. The sticker includes the Mac address and serial number of
the gateway. The end-user will need this information to register via
www.niko.eu/remotecontrolservice .
Error codes
When the module and the Internet connection are functioning properly, the SERVER LED and GATEWAY LED of that module
will light up green.
The table below provides an overview of all error codes.
Internet connection specifications
The required specifications are standard settings of a new WiFi router, i.e.:
• for DNS access: outgoing port 53 open
• for data traffic: outgoing ports 80, 443 and 22 open
• for (S)NTP: outgoing port 123 open
Technical data
• input voltage: 230 Vac ± 10%, 50 Hz
• maximum power consumption: 0,06 A
• maximum stand-by consumption: 3,5 W
• RJ45 port at the bottom of the module for connection to the Niko Home Control IP interface (Ethernet cable
included)
• RJ45 port at the top of the module for connection to the Internet
• ambient temperature: 0 - 45°C
• dimensions: DIN 8E
• CE marked
This is a Class A product. In a domestic environment, this product can cause radio interference in which case the
end-user may be required to take adequate measures.
LED ACTION ERROR POSSIBLE SOLUTIONS
SERVER LED Lights up orange. The Internet connection is OK but
there is a problem with the
communication with the server.
Contact the customer support department.
Blinks orange. The Internet connection is
disrupted.
Verify that the Internet connection is still
active or contact the customer support
department.
GATEWAY
LED Blinks orange. No error code. The gateway software is being updated. The Internet connection
will be re-established after 20 minutes max.
Contact the customer support department if the GATEWAY LED keeps blinking.