Niko 550-00001, Руководство по установке

Страница: 32 / 140

6. Push buttons with display
31
6. Push buttons with display
Description
Three types of push buttons with display are available:
• mood setting display
• thermostat
• eco-display
Installation
Push buttons with display are integrated in a bridge. The bridge is mounted onto a standard flush-mounting box using
screws.
1 Connect the push button to the two-wire bus cable using the double plug-in connector (marked BB) on the back of
the control element . Connect each wire separately to one of the contacts.
The push button with display is now connected. Use the other opening of the contact to establish a connection to
the next control element if required.
2 Mount the bridge onto the single flush-mounting box using screws in order to secure the push button with display.
Use a bridge with a set of claws if no screw holes are provided in the flush-mounting box.
Three types of bridges are available:
• bridge 60 x 71 mm with claw connection
• bridge 71 x 71 mm with screw connection
• bridge 60 x 71 mm with screw connection
3 Complete the installation using a flush surround plate from our series Niko Pure , Niko Intense or Niko Original .
• Strip the wires of the bus cable 9 - 10 mm.
• A maximum of two wires with a diameter of 0.5 - 1 mm each can be connected per contact.
Installation diagram for push button with display
A. Single flush-mounting box
(not a Niko product)
B. Push button with display
C. Flush surround plate
A B C