Niko 550-00001, Руководство по установке

Страница: 57 / 140

56
8. Universal dimming module
Follow the steps below to install the module:
1 Press the dimming module onto the DIN rail until it clicks into place.
2 Connect the L phase wire and the N neutral conductor to the L and N screw terminals respectively.
3 Connect the circuits you wish to dim to the outputs.
4 Connect the dimming module to the module before it. Slide the sliding contact of this module to the right until it
clicks into the dimming module. This will ensure that the bus and the power supply voltage are connected.
Selecting the type of lighting
Adjust the position of the DIP switch to manually select the type of lighting you wish to dim. Follow the instructions in the
diagram below.
incandescent lamp / 230 V halogen lamp
halogen lamp with an electronic transformer
halogen lamp with an electromagnetic transformer
dimmable LED lamp – reverse phase control
dimmable LED lamp – phase control
dimmable economy lamp (CFLi) – reverse phase control
dimmable economy lamp (CFLi) – phase control