Niko 550-00001, Руководство по установке

Страница: 48 / 140

6. Push buttons with display
47
5 Select back using the navigation buttons and press button "C".
Eco-function
The eco-function applies to all the lights and connected circuits that the resident wishes to switch off upon leaving the
home. You can determine the outputs that are to be included in this function while programming the installation.
Press the eco-button to activate the eco-function. The reduction in energy consumption will be registered immediately.
Presence simulation
The presence simulation function allows the resident to have the lights switch on automatically at certain times. This way,
it looks as though someone is home. While programming the installation, you can personally determine which lights
should be included in the presence simulation as well as when they should switch on and how long they should be left on
for.
Press the presence simulation button to activate the presence simulation function.
Installation
See Installation on page 31 .
Technical data
• back-lit colour display
• resting potential: 26 Vdc (SELV, safety extra-low voltage)
• ambient temperature: 5 - 45°C
• dimensions of the display: 45 x 45 x 32 mm (HxWxD)
• flush-mounting depth: 20 mm
• weekly energy consumption in EUR or GBP
• in conformity with IEC60730-2-9, EN 50491-5-2, EN 50491-2 and EN 50090-2-3
Mount the eco-display:
• away from direct sunlight.
• near the door most commonly used by the resident to exit the home.