Niko 550-00001, Руководство по установке

Страница: 127 / 140

126
22. Analogue control module 1-10 V
22. Analogue control module 1-10 V
Description
Up to three high-power dimmers and/or switching devices can be connected to the Niko Home Control installation using
the analogue control module 1-10 V:
• dimmers with an analogue input of 1-10 V for dimming monochrome LEDs.
• electronic control gear for fluorescent lights.
• high-power dimmers with an analogue input of 1-10 V.
Useful Niko reference codes: 05-715, 65-410, 65-412, 65-416, 330-00701.
Overview
550-00241
A. Screw terminals 1-3 This is where you connect a dimmer.
B. Sliding contact The sliding contact is used for
connecting the next module, which
means that the bus and the power
supply module are then also
interconnected.
C. Buttons 1-3 These buttons are used for activating or
deactivating each individual output.
Please remember that the activation or
deactivation is only temporary as it will
be overruled by the next bus
communication.
D. ADDRESS button 1 The function of this button is twofold. In
addition to the function described under
“C” this button is used for transmitting
the unique address of the module during
the addressing phase while
programming the installation.
E. CHANNEL LEDs One LED per channel. The CHANNEL
LED lights up in TEST mode when the
output is activated.
F. STATUS LED The STATUS LED lights up in TEST mode
when the module is connected correctly
and is functioning properly. If an error
occurs, the LED will blink to indicate an
error code.
A
A
B
F
E
D
C