Niko 550-00001, Руководство по установке

Страница: 70 / 140

9. Electricity measuring modules
69
Programming measuring modules
Use the programming software to select the currency of your choice: EUR or GBP. The following settings can be selected
per channel:
• channel name.
• single-phase or three-phase use.
• channel type: global (meter from the energy supplier), consumer, amount generated.
Error codes
When the module is functioning properly, the STATUS LED will light up in TEST mode only. If one or several errors occur,
the LED will blink to indicate the error code of the error with the highest priority. The table below provides an overview of
all error codes.
• If the voltage at the power supply of the Niko Home Control installation is disrupted, no data will be logged,
even if electricity is still being consumed or produced by the switching circuits measured.
• You will lose all data of a channel if you use the programming software to:
• remove the channel.
• change the energy type (electricity/gas/water).
• change the measurement type.
• change the load type.
LED ACTION ERROR POSSIBLE CAUSES
STATUS LED Blinks – one pulse per two
seconds. Software error Wrong software version.*
*Download the latest software version
from the Niko website to upgrade the
module.
CHANNEL
LED Blinks rapidly. Module error The module is faulty.
No voltage is provided to the
L/N screw terminals.