Niko 550-00001, Руководство по установке

Страница: 86 / 140

13. Touchscreen
85
Installation
Connection diagrams
With Power over Ethernet (PoE)
• The Niko Home Control installation must be fitted with an IP interface (see IP interface on page 75 ) to enable
communication with the touchscreen. The touchscreen can be connected to the IP interface either directly
or via the home network. Ensure that the touchscreen is on the same network as the IP interface.
• Use a twisted pair cable, such as a UTP, FTP or STP cable. Both the touchscreen and the IP interface have
an RJ45 jack. You will need to mount RJ45 plugs onto the cable to be able to connect one end of the cable
to the IP interface, and the other end to the touchscreen.
• The touchscreen can be supplied with power using Power over Ethernet (PoE) via the same twisted pair
cable, for which you use the Niko PoE power supply (550-00501). Alternatively, you can provide a separate
power supply cable, which you connect to a separate 24 Vdc power supply module in the electrical cabinet.
In that case, you will need a 24 V power supply cable such as an SVV, JYSTY, TPVF or UTP cable in addition
to the twisted pair cable.
L
N
550-00501
twisted pair cable
(UTP, FTP or STP)
twisted pair cable
(UTP, FTP or STP)