Niko 550-00001, Руководство по установке

Страница: 115 / 140

114
18. Motor module
Operation
Each module can operate up to three motors. The desired opening and closing times can be entered via the programming
software. This will ensure that the exact position of the roll-down shutter is known at all times, and it allows you to enter
the position of your preference.
Buttons “D” can be used to manually activate or deactivate the motors from the motor module via low-energy bistable
relays in the module. The status of the relay only changes when a data pulse is generated by the controller or by one of the
switch buttons. Please remember that the manual activation or deactivation is only temporary as it will be overruled by the
next bus communication.
Use the specific push buttons (see Wall-mounted printed circuit boards and push buttons on page 21 ) to operate
the motor module. This function can also be incorporated in a mood setting.