Niko 550-00001, Руководство по установке

Страница: 44 / 140

6. Push buttons with display
43
Calibrating the clock thermostat
If the thermostat temperature differs from the actual temperature, the thermostat must be calibrated.
1 Measure the temperature in the centre of the room using a thermometer.
2 Select CALIBRATION on the following screen:
3 Press button "C".
4 Use the navigation buttons until the temperature on the display corresponds to the temperature measured in the
centre of the room. Press button "C".
5 Select back using the navigation buttons and press button "C".
• Only calibrate the thermostat after the installation has been in use for at least two hours as this will ensure
that the temperature displayed has stabilised.
• Do not calibrate the thermostat temperature under extreme temperature conditions.
You can increase or decrease the temperature on the display by six degrees.