Niko 550-00001, Руководство по установке

Страница: 136 / 140

25. RF interface Easywave
135
25. RF interface Easywave
Description
The RF interface Easywave lets you use Niko wireless Easywave controls in the Niko Home Control installation. This
module can receive Easywave radio signals, which allows the use of those controls:
• where this would not normally be possible, e.g. on glass or concrete surfaces.
• for the renovation of heritage-listed buildings.
• for expansions of existing installations where drilling or channelling work is not permitted.
• in office areas with movable partition walls.
• when complex cabling is to be avoided.
Overview
550-00610
A. ANTENNA connection Connection for the external antenna (supplied in the
box).
B. ADDRESS button This button is used while programming the
installation to send the unique address of the
module during the addressing phase.
C. LED for communication This LED will blink when communication is received
from an Easywave control.
D. STATUS LED The STATUS LED lights up in TEST mode when the
module is connected correctly and is functioning
properly. If an error occurs, the LED will blink to
indicate an error code.
C
A
D
B