Niko 550-00001, Руководство по установке

Страница: 80 / 140

12. Gateway
79
Installation
Wiring diagram
Connecting and mounting the gateway
Follow the steps below to mount the gateway:
1 Press the gateway anywhere onto the DIN rail until it clicks into place. Ensure that the gateway is within reach of
the IP interface and the local router.
2 Press the green connector (supplied) onto the bottom of the gateway near the L/N connection, until it clicks into
place.
3 Connect the L phase wire and the N neutral conductor to the L and N screw terminals respectively.
4 Use the ethernet cable (supplied) to connect the lower RJ45 port with the IP interface of the Niko Home Control
installation.
When both ports are connected correctly, the ETHERNET LED on the IP interface will light up.
5 Use a second ethernet cable to connect the upper RJ45 port to an available port on the local router.
• Ensure that the RJ45 port is easy to reach.
• Peferably, use a shielded network cable and keep it separate from 230 V cables to avoid crosstalk. Run the
network cable alongside the SELV cables, for instance.
• Do not connect more than one gateway to the Niko Home Control installation.
• The end-user must ensure that the WiFi network is secure.
550-00020 550-00508
twisted pair cable
(UTP, FTP or STP)
twisted pair cable
(UTP, FTP or STP)
twisted pair cable
(UTP, FTP or STP)
N
L
230 Vac
98% 15:44 iPad
edit edit control living room
98% 15:44 iPa Pad
edit edit edit edit control living room
550-00580
Internet