manualshive.com logo in svg

NI GPIB-410, Руководство пользователя

Поделиться
Скачать
NI GPIB-410 Скачать руководство пользователя страница 9

Contents

© National Instruments Corp.

ix

GPIB-410 User Manual

Figure A-1. Main Screen ....................................................................... A-2
Figure A-2. Capture Settings Screen ..................................................... A-3
Figure A-3. Main Me nu Screen with Monitor Input and Capturing

Enabled .............................................................................. A-4

Figure A-4. Capture Display Screen ..................................................... A-6
Figure A-5. Pattern Generator Screen ................................................... A-7
Figure A-6. Trigger Specification Screen ............................................. A-10
Figure A-7. Main Menu Screen with Trigger Enabled ......................... A-11
Figure A-8. Captured Data Including Trigger Point ............................. A-12

Figure C-1.

GPIB-410 Parts Locator Diagram (Rev. B.2 or Higher) ... C-2

Figure C-2.

Base I/O Address 300 Hex (Rev. B.2 or Higher) .............. C-4

Figure C-3.  Factory Default DMA Channel 1 (Rev. B.2 or Higher) .... C-6
Figure C-4.

DMA Cha nnel Jumper Settings for DMA Channels 2
and 3 (Rev. B.2 or Higher)................................................. C-7

Figure C-5.

Factory Default IRQ Line 7 Selected (Rev. B.2 or
Higher) ............................................................................... C-8

Figure C-6.

IRQ Lines 6 and 2 Selected (Rev. B.2 or Higher) ............. C-8

Figure C-7.  GPIB-410 Parts Locator Diagram (Rev. C) ....................... C-10
Figure C-8.

Base I/O Address 300 Hex (Rev. C) .................................. C-12

Figure C-9.  Factory Default DMA Channel 1 (Rev. C) ........................ C-14
Figure C-10. DMA Channel 1 for Capturing and DMA Channel 3 for

Sourcing (Rev. C) .............................................................. C-15

Figure C-11. DMA Channel 1 for Capturing and no DMA Channel for

Sourcing (Rev. C) .............................................................. C-15

Figure C-12. Factory Default IRQ Line 7 Selected (Rev. C) ..................C-16
Figure C-13. IRQ Lines 6 and 2 Selected (Rev. C)................................. C-17
Figure C-14. Configuration Settings Screen ........................................... C-18

Figure G-1.  FMT410 Output Listing ..................................................... G-3
Figure G-2. Abbreviated FMT410 Output Listing ................................ G-5

Tables

Table C-1.

DMA Channels for the GPIB-410 (Rev. B.2 or Higher) ... C-5

Table C-2.

DMA Channels for the GPIB-410 (Rev. C)....................... C-13

Table G-1. Run-Time Flags ................................................................. G-4

Содержание GPIB-410


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды