Appendix A
Tutorial
© National Instruments Corp.
A-3
GPIB-410 User Manual
2.
Press <F3> to select the Capture Settings screen as shown in Figure
A-2.
Figure A-2. Capture Settings Screen
Press <Enter> or the down arrow key until the
Maximum
capacity
field is highlighted. This field indicates the maximum number of
capture samples that can be stored in PC memory at one time. Enter
the value 16.
For the other fields on the Capture Settings screen, the default values
are used for this example. Later, you can change any of these settings,
but, for now, leave them as they are. The relevant settings are
summarized as follows.
•
The GPIB-410 is set to capture any of the seven GPIB events listed
on the screen, including data and command transfers (
xfers
) and
ATN transitions.
