manualshive.com logo in svg

NI GPIB-410, Руководство пользователя

Поделиться
Скачать
NI GPIB-410 Скачать руководство пользователя страница 123

Saving and Viewing Capture Information on Disk

Appendix G

GPIB-410 User Manual

G-4

© National Instruments Corp.

Unlike the file in the previous example, some capture files may contain
thousands of status entries.  As 

FMT410

 translates each 2-byte entry into

a 60- to 80-byte line of ASCII text, the quantity of output can add up
quickly.  To alleviate this problem, the run-time flags in Table G-1 are
used to condense or eliminate portions of 

FMT410

 output if desired.

Table G-1.  Run-Time Flags

Flag

Description

-tnumber

Output only the capture table indicated by number.  If
number is omitted, the number of tables contained in the
file is shown on the screen.  This flag is used with
Revision A capture files, which may contain more than
one capture table.  Revision B and C GPIB-410 software
only store one capture table per file.

-inumber

Begin output range at index number.  Default range
begins at index 0 of each capture table.

-cnumber

Limit output range to count of number entries.  Default
range extends to the end of each capture table.

-foption...

p
b
r
h

Modify formatted output of each capture table.

Do not format position display column.
Do not format data/control binary display columns.
Do not format remarks display column.
Format control column in hexadecimal.

-xoption...

e
d

c

Extract capture information without headers or formatting.
If this flag is specified, all -f options are ignored.

Extract all data/control entries in output range.
Extract only valid data bytes in output range.  If the e
option is specified, also extract the accompanying control
bytes.
Extract only valid command bytes in output range.  If the
e option is specified, also extract the accompanying
control bytes.

-h or -?

Display an online help screen describing each of the
above flags.

Содержание GPIB-410


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды