manualshive.com logo in svg

NI GPIB-410, Руководство пользователя

Поделиться
Скачать
NI GPIB-410 Скачать руководство пользователя страница 126

© National Instruments Corp.

H-1

GPIB-410 User Manual

Appendix H
Differences between Software
Revisions

                                                                                                      

This appendix describes the differences between the major software
revisions.

The Revision B release of the GPIB-410 software was a functional
superset of the Revision A release.  In addition to enhanced
functionality in several areas of operation, minor improvements to the
user interface were also made.  Likewise, the Revision C release builds
upon the functionality of Revision B.

Note:

Capture and configuration file formats are compatible across all
revisions of the software.

Important Differences

Users already familiar with Revision A and Revision B will find that the
original screens and functions operate in the same manner as before,
with the following important exceptions:

•

The Immediate Write function, <Alt-W>, which was formerly
included in the list of functions on the Main Menu screen in
Revision A, is a local function on the Capture Settings screen in
Revision B and Revision C.

•

In Revision B and Revision C, both the Immediate Write function
and the Auto-write function overwrite previous information in the
selected capture file whenever a new write operation is initiated.
This approach differs from that of Revision A, wherein existing
capture files were appended to with each new write operation.

•

In Revision A and Revision B, Monitor Input mode can be exited by
pressing the function key of any analyzer screen.  In Revision C,
Monitor Input mode can be exited only by pressing <Alt-M>,
<Esc>, or the function key of the currently displayed analyzer
screen.

Содержание GPIB-410


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды