manualshive.com logo in svg

NI GPIB-410, Руководство пользователя

Поделиться
Скачать
NI GPIB-410 Скачать руководство пользователя страница 57

Software Reference

Chapter 4

GPIB-410 User Manual

4-20

© National Instruments Corp.

Once a pattern is constructed, use the left and right cursor control keys
to search up or down in the buffer from the currently active cursor
position.  Use the <Ctrl> left and right cursor control keys to search for
an entry which does not match the pattern.  When a [non-]matching
entry is found, the currently active cursor is moved to the position of
that entry.  If the end of the buffer is reached while searching in either
direction, the GPIB-410 loops around and continues the search from the
other end of the buffer.  If no pattern is found, an error message is
displayed in the help/error bar and the currently active cursor remains
unchanged.

The search pattern definition window does not have to be visible to
perform a search operation.  Pressing the left or right arrow key
whenever the Capture Display screen is active and captured data is
present initiates a search for the most recently defined pattern.

The Pattern Generator Screen

This screen shows the controlling parameters in effect during a pattern
generation sequence (see Figure 4-6).

Figure 4-6.  Pattern Generator Screen

Содержание GPIB-410


















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды