Mitsubishi Electric MELSEC-L LD75D, Руководство пользователя

Страница: 220 / 818

218
(11)[Cd.13] Positioning operation speed override
(12)[Cd.14] New speed value
Item Description
Setting details
• To use the positioning operation speed override function, use this data item to specify an "override" value.
• For details on "override", refer to

Page 550, Section 12.5.2.
• If the speed becomes lower than the minimum unit due to override 1% or others, it is raised to the minimum unit. At this time, the
warning "Less than minimum speed" (warning code: 110) will occur.
Setting value
■ Set with a decimal.
Default value 100
Storage buffer memory
address
Axis 1: 1513
Axis 2: 1613
Axis 3: 1713
Axis 4: 1813
Item Description
Setting details
• When changing the speed, use this data item to specify a new speed. (  Page 219, Section 5.7.2 (12) (a))
• The operation halts if you specify "0".
Setting value
■
Set with a decimal.
Default value 0
Storage buffer memory
address
Axis 1: 1514, 1515
Axis 2: 1614, 1615
Axis 3: 1714, 1715
Axis 4: 1814, 1815
Setting value
Override value (%)
1 to 300
K
Actual value
Conversion into an integer value
Cd.14 New speed value
10
n
Unit conversion table ( Cd.14 )
n
-2 mm/min
-3
inch/min
-3
degree/min
0 pulse/s
Unit
R
Setting value
(Decimal)
Example: When the " Cd. 14 New speed
value" is set as "20000.00mm
/min", the buffer memory
stores "2000000".