Mitsubishi Electric MELSEC-L LD75D, Руководство пользователя

Страница: 308 / 818

306
(1) Details of areas
• Parameter area: Area where parameters, such as positioning parameters and OPR parameters, required for
positioning control are set and stored. (Set the items indicated with [Pr.1] to [Pr.57], [Pr.70], and [Pr.150] for
each axis.)
• Monitor data area: Area where positioning system or LD75 operation state is stored. (Set the items indicated
with [Md.1] to [Md.48], [Md.50] to [Md.52].)
• Control data area: Area where data for operating and controlling positioning system is set and stored. (Set
the items indicated with [Cd.1] to [Cd.42].)
• Positioning data area (No.1 to 600): Area where positioning data No.1 to 600 is set and stored. (Set the
items indicated with [Da.1] to [Da.10] and [Da.27] to [Da.29] for each positioning data.)
• Block start data area (No.7000 to 7004): Area where information required only when carrying out block No.
7000 to 7004 high-level positioning is set and stored. (Set the items indicated with [Da.11] to [Da.19].)
• PLC CPU memo area: Area where condition judgment values required for special positioning, etc., are set
and stored.
Buffer memory
Parameter area
Monitor data area
Control data area
Parameter area
LD75
Data is backed up
here.
User accesses
here.
Flash ROM
Positioning data area
(No.1 to 600)
Block start data area
(No.7000 to 7004)
Positioning data area
(No.1 to 600)
Block start data area
(No. 7000 to 7004)
PLC CPU
memo area