Mitsubishi Electric MELSEC-L LD75D, Руководство пользователя

Страница: 226 / 818

224
(21)[Cd.23] Speed-position switching control movement amount change register
(a) Setting range
Item Description
Setting details
• During the speed control stage of the speed-position switching control (INC mode), it is possible to change the specification of
the movement amount during the position control stage. For that, use this data item to specify a new movement amount. (

Page 224, Section 5.7.2 (21) (a))
• The new movement amount has to be set during the speed control stage of the speed-position switching control (INC mode).
• The value is reset to "0" when the next operation starts.
Setting value
■ Set with a decimal.
Default value 0
Storage buffer memory
address
Axis 1: 1526, 1527
Axis 2: 1626, 1627
Axis 3: 1726, 1727
Axis 4: 1826, 1827
[Pr.1] Unit setting Setting range
0: mm
0 to 2000000000 (

10
-2
mm/min)
1: inch
0 to 2000000000 (

10
-3
inch/min)
2: degree
0 to 2000000000 (

10
-3
degree/min)
3: pulse 0 to 4000000 (pulse/s)
10
n
Actual value
n
-1
m
-5
inch
-5
degree
0
pulse
Unit
R
Setting value
(Decimal)
Conversion into an integer value
Unit conversion table ( Cd.23 )
Speed-position switching
control movement amount
change register
Cd.23
Example: If " Cd. 23 Speed-position
switching control movement
amount change register" is set
as "20000.0 m", the buffer
memory stores "200000".