Mitsubishi Electric MELSEC-L LD75D, Руководство пользователя

Страница: 680 / 818

678
JOG
300
Speed change
during
deceleration
■ Description
The speed change request is issued during
deceleration stop with JOG start signal OFF.
■ Operation status at warning occurrence
The speed change is not carried out.
■
Action
Do not carry out the JOG speed change during
deceleration with the JOG start signal OFF.
■ Buffer memory address
Axis 1: 1516
Axis 2: 1616
Axis 3: 1716
Axis 4: 1816
■
Setting range
Speed change request
1: Request the speed change.
301
JOG speed limit
value
■
Description
• The JOG speed exceeds the JOG speed limit
value at the JOG start.
• The new speed value exceeds the JOG speed
limit value when the speed is changed during
operation.
■ Operation status at warning occurrence
• When the speed exceeds the JOG speed limit, the
JOG operation is carried out with the JOG speed
limit value.
• While the speed is limited by the JOG speed limit
value, the "Speed limiting flag" is turned ON.
■ Action
Set the value within the setting range.
■
Buffer memory address
• New speed value
Axis 1: 1514, 1515
Axis 2: 1614, 1615
Axis 3: 1714, 1715
Axis 4: 1814, 1815
■ Setting range
0 to 4000000 [pulse/s], 0 to 2000000000 [

10
-2
mm/min or other]
■
Action
Set the value within the setting range.
■
Buffer memory address
• JOG speed limit value
Axis 1: 48, 49
Axis 2: 198, 199
Axis 3: 348, 349
Axis 4: 498, 499
■
Setting range
1 to 4000000 [pulse/s], 1 to 2000000000 [

10
-2
mm/min or other]
Manual pulse
generator
401
Outside manual
pulse generator
input
magnification
range
■
Description
The manual pulse generator 1 pulse input
magnification is set at 0 or 1001 or higher.
■ Operation status at warning occurrence
• When input magnification is set at 1001 or higher:
Re-set to 1000.
• When input magnification is set at 0: Re-set to 1.
■
Action
Set the manual pulse generator 1 pulse input
magnification to within the setting range.
■ Buffer memory address
Axis 1: 1522, 1523
Axis 2: 1622, 1623
Axis 3: 1722, 1723
Axis 4: 1822, 1823
■
Setting range
Manual pulse generator 1 pulse input magnification:
1 to 1000
Positioning
operation
500
Deceleration/stop
speed change
■
Description
The speed change request is issued during
deceleration stop.
■ Operation status at warning occurrence
The speed change is not carried out.
■ Action
Do not carry out the speed change during
deceleration with a stop command, during stoppage,
or during automatic deceleration with position
control.
■
Buffer memory address
Axis 1: 1516
Axis 2: 1616
Axis 3: 1716
Axis 4: 1816
■ Setting range
Speed change request
1: Request the speed change.
Classification
of warnings
Warning
code
Warning name Operation status at warning occurrence
Action/Related buffer memory address/Set range
(Setting with program)