Mitsubishi Electric MELSEC-L LD75D, Руководство пользователя

Страница: 474 / 818

472
10.4.2
Condition data setting examples
The following shows setting examples for "condition data".
(1) Setting the device ON/OFF as a condition
[Condition] Device "XC" (= Axis 1 BUSY signal) is OFF
(2) Setting the numeric value stored in the "buffer memory" as a condition
[Condition]
The value stored in buffer memory addresses "800, 801" (= "[Md.20] Current feed value") is "1000" or larger.
(3) Designating the axis and positioning data No. to be simultaneously started in
"simultaneous start"
[Condition] Simultaneously starting "axis 2 positioning data No.3"
*1 The setting value of start axis (the axis which executes positioning start) should be "0000H".
[Da.15]
Condition target
[Da.16]
Condition operator
[Da.17]
Address
[Da.18]
Parameter 1
[Da.19]
Parameter 2
01H: Device X 08H: DEV=OFF

0CH

[Da.15]
Condition target
[Da.16]
Condition operator
[Da.17]
Address
[Da.18]
Parameter 1
[Da.19]
Parameter 2
04H: Buffer memory (2
words)
04H: **

P1 800 1000

[Da.15]
Condition target
[Da.16]
Condition operator
[Da.17]
Address
[Da.18]
Parameter 1
[Da.19]
Parameter 2
05H: Positioning data No. 20H: Axis 2 designation

High-order 16 bits "0003H"
*1

*1