Mitsubishi Electric MELDAS 60 Series, Руководство по параметрам

Страница: 152 / 443

5. Base Specifications Parameters
II - 56
# Items Details Setting range (unit)
1220 aux04
(bit 0)
(For L
system
only)
Tool life check
timing
selection Specify the life check standard applicable when the
use count is incremented in tool life management II.
0: Determine that the tool life is over when the
incremented use count exceeds the life count.
(Use count > life count)
1: Determine that the tool life is over when the
incremented use count has reached the life
count. (Use count
≥
life count)
0/1
(Default: 0)
aux04
(bit1)
Validity of
space code in
comment Validate or invalidate the space code described in the
comment statements in the machining program in edit
operation with the special display.
0: Invalidate the space code in the comment
statements of the machining program.
1: Validate the space code in the comment
statements of the machining program.
0/1
(Default: 0)
aux04
(bit2)
Not used.
aux04
(bit3)
Not used.
aux04
(bit4)
Data input/
output unit
selection Specify the input/output data unit for tool data and
user parameter input/output.
0: Internal unit (metric)
1: Follows command mode set with #1152 I_G20
Metric when set to 0 Inch when #1152 I_G20 is
set to 1
This parameter is valid when initial metric (#1041
I_inch 0) is set and the setting and display unit is the
command unit (#1226 aux10 bit6 1). In all other
cases, the tool data will be input and output with the
internal units.
0/1
aux04
(bit7)
Host
communication
validity during
automatic
operation Set whether Ethernet communication is enabled
during automatic operation.
0: Ethernet communication disabled during
automatic operation
1: Ethernet communication enabled during
automatic operation
(Note) If Ethernet communication is enabled during
automatic operation, interrupt processes
required for communication will be carried
out, so the machining performance could be
affected.
0/1