Mitsubishi Electric MELDAS 60 Series, Руководство по параметрам

Страница: 241 / 443

7. Servo Parameters
7.2 MDS-C1-Vx High-gain (MDS-B-Vx4 Compatible)
II - 145
No. Items Details Setting range
2218
(PR)
SV018
PIT Ball screw
pitch Set the ball screw pitch. Set to “360” for the rotary axis. 1 to 32767
(mm/rev)
2219
(PR)
SV019
RNG1 Position
detector
resolution In the case of the semi-closed loop control
Set the same value as SV020 (RNG2). (Refer to the
explanation of SV020.) 1 to 9999
(kp/rev)
In the case of the semi-closed loop control
Set the same value as SV020 (RNG2). (Refer to the
explanation of SV020.) 1 to 9999
(kp/pit)
Detector model name Resolution SV019 setting
OHE25K-ET, OHA25K-ET 100,000(p/rev) 100
OSE104-ET, OSA104-ET
100,000(p/rev) 100
OSE105-ET, OSA105-ET 1,000,000(p/rev) 1000
RCN723 (Heidenhain) 8,000,000(p/rev) 8000
Relative position detection
scale Refer to specification
manual for each
detector PIT/Resolution (µm)
AT41 (Mitsutoyo) 1 (µm/p) The same as SV018
(PIT)
FME type, FLE type
(Futaba) Refer to specification
manual for each
detector PIT/Resolution (µm)
MP type (Mitsubishi
Heavy Industries) Refer to specification
manual for each
detector PIT/Resolution (µm)
AT342 (Mitsutoyo) 0.5 (µm/p) Twice as big as
SV018 (PIT)
AT343 (Mitsutoyo) 0.05 (µm/p) 20 times as big as
SV018 (PIT)
LC191M (Heidenhain) Refer to specification
manual for each
detector PIT/Resolution (µm)
LC491M (Heidenhain) Refer to specification
manual for each
detector PIT/Resolution (µm)
Set the number of pulses per one revolution of the motor
end detector.
Detector model name SV020 setting
OSE104, OSA104 100
OSE105, OSA105 1000
2220
(PR)
SV020
RNG2 Speed
detector
resolution 1 to 9999
(kp/rev)
2221 SV021
OLT
Overload
detection
time constant Set the detection time constant of Overload 1 (Alarm 50).
Set to "60" as a standard. (For machine tool builder
adjustment.) 1 to 999
(s)
2222 SV022
OLL
Overload
detection
level Set the current detection level of Overload 1 (Alarm 50) in
respect to the stall (rated) current. Set to "150" as a
standard. (For machine tool builder adjustment.) 110 to 500
(Stall [rated]
current %)