Mitsubishi Electric MELDAS 60 Series, Руководство по параметрам

Страница: 110 / 443

2. Machining Parameters
2.4 Barrier Data
II - 14
2.4 Barrier Data
# Item Contents Setup range (unit)
8300 P0
(For L system only)
Set the reference X-coordinates of the chuck and
the tail stock barrier.
Set the center coordinate (Radius value) of
workpiece by the basic machine coordinate system. ±99999.999 (mm)
8301
8302
8303
8304
8305
8306 P1
P2
P3
P4
P5
P6
(For L system only) Set the area of the chuck and tail stock barrier.
(Radius value)
Set the coordinate value from the center of
workpiece for X-axis. Set the coordinate value by
basic machine coordinate system for Z-axis. ±99999.999 (mm)
8310 Barrier ON
(For L system only)
Select the validity of the chuck and tailstock barrier.
0: Invalid (Setting from special display unit valid)
1: Valid
0/1
8311
8312 P7
P8
(For L system only) Set the area of the left spindle section.
•
X axis: Set the coordinate value from the
workpiece center (P0). (radius value)
•
Z axis: Set the coordinates in the basic
machine coordinate system.
±99999.999 (mm)
8313
8314 P9
P10
(For L system only) Set the area of the right spindle section.
•
X axis: Set the coordinate value from the
workpiece center (P0). (radius value)
•
Z axis: Set the coordinates in the basic
machine coordinate system.
±99999.999 (mm)
8315 BARRIER TYPE (L)
(For L system only)
Set the shape of the left chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
0/1/2
8316 BARRIER TYPE (R)
(For L system only)
Set the shape of the right chuck and tailstock
barrier.
0: No area
1: Chuck
2: Tailstock
0/1/2