Mitsubishi Electric MELDAS 60 Series, Руководство по параметрам

Страница: 170 / 443

5. Base Specifications Parameters
II - 74
# Items Details Setting range (unit)
1274
(PR)
ext10
(bit7) Word range
check Select whether to check that the operation
expression of the word date in the program is
enclosed in brackets ( [ ] ) when the machine
program is executed.
This check is also applied to the 08000 to 09999
and the machine manufacture macro program.
0: Check valid
1: Check invalid
0/1
1275
(PR)
ext11 Not used.
1276
(PR)
ext12 Not used.
1277
(PR)
ext13
(bit0) Tool life
management II
count type 2 Specify how and when the mount or use count is
incremented in tool life management II.
0: Type 1
The count is incremented when the spindle is
used for cutting.
1: Type 2
The count is incremented for the tool used or
mounted for one program. The increment is
enabled by resetting.
0/1
(Default: 0)
1278
(PR)
ext14
(bit0) Program restart
method selection Select the program restart method.
0: Type A
1: Type B
0/1
ext15
(bit0) System
synchroniza-
tion method Select the system synchronization method.
0: If one system is not in automatic operation,
ignore the synchronization command and
execute the next block.
1: Operate according to the synchronization
ignore signal.
If the synchronization ignore signal is set to
"1", the synchronization command will be
ignored. When set to "0", synchronization will
be applied.
0/1
ext15
(bit1) Interrupt amount
during machine
lock Select the manner to handle the interruption
amount during machine lock.
0: Cancel when reset.
1: Do not cancel when reset. Instead cancel
during manual zero point return.
0/1
1279
(PR)
ext15
(bit2) Selection of
cutting start
interlock target
block Select whether the cutting start interlock is valid for
successive cutting blocks.
0: Valid for successive cutting blocks.
1: Invalid for successive cutting blocks.
0/1