National Instruments C Series, Calibration Procedure

Page: 1 / 8

CALIBRATION PROCEDURE
NI 9202
±10 V, 10 kS/s, 24-Bit, 16-Channel C Series Voltage Input Module
This document contains the verification and adjustment procedures for NI 9202. For more
information about calibration solutions, visit
ni.com/calibration .
Contents
Software.................................................................................................................................... 1
Documentation.......................................................................................................................... 1
Test Equipment..........................................................................................................................2
Test Conditions..........................................................................................................................3
Initial Setup............................................................................................................................... 3
Verification................................................................................................................................4
Accuracy Verification....................................................................................................... 4
Adjustment................................................................................................................................ 5
Accuracy Adjustment........................................................................................................5
EEPROM Update......................................................................................................................6
Reverification............................................................................................................................6
Accuracy under Calibration Conditions....................................................................................6
Revision History....................................................................................................................... 7
Worldwide Support and Services.............................................................................................. 7
Software
Calibrating the NI 9202 requires the installation of NI-DAQmx 17.6 or later on the calibration
system.
You can download NI-DAQmx from ni.com/downloads . NI-DAQmx supports LabVIEW,
LabWindows
™
/CVI
™
, ANSI C, and .NET. When you install NI-DAQmx, you only need to
install support for the application software that you intend to use.
Documentation
Consult the following documents for information about the NI 9202, NI-DAQmx, and your
application software. All documents are available on
ni.com and help files install with the
software.