Mindray iMEC8 Vet, Руководство оператора

Страница: 92 / 202

11-6
11.5.9 Setting the SpO
2
Tone Mode
Select [ Others >> ] from the [ User Maintenance ] menu. In the popup menu, you can set [ SpO
2
Tone ] as [ Mode 1 ] or
[ Mode 2 ].
WARNING

The same SpO
2
tone mode shall be used for the same monitors in a single area.
11.6 Measurement Limitations
If you doubt the measured SpO
2
, check patient vital signs first. Then check the monitor and SpO
2
sensor. The following
factors may influence the accuracy of measurement:

Ambient light
 Physical movement (patient and imposed motion)

Diagnostic testing

Low perfusion
 Electromagnetic interference, such as MRI environment

Electrosurgical units
 Dysfunctional hemoglobin, such as carboxyhemoglobin (COHb) and methemoglobin (MetHb)

Presence of certain dyes, such as methylene and indigo carmine

Inappropriate positioning of the SpO
2
sensor, or use of incorrect SpO
2
sensor
 Drop of arterial blood flow to immeasurable level caused by shock, anemia, low temperature or vasoconstrictor.
11.7 Masimo Information

Masimo Patents
This posting serves as notice under 35 U.S.C.§287(a) for Masimo patents: http://www.masimo.com/patents.htm.

No Implied License
Possession or purchase of this device does not convey any express or implied license to use the device with
unauthorized sensors or cables which would, alone, or in combination with this device, fall within the scope of one or
more of the patents relating to this device.