Mindray iMEC8 Vet, Руководство оператора

Страница: 100 / 202

12-6
12.7 Changing NIBP Settings
By selecting the NIBP parameter window, you can enter the [
NIBP Setup
] menu.
12.7.1 Setting the Initial Cuff Inflation Pressure
You can set the initial cuff inflation pressure manually. In the [ NIBP Setup ] menu, select [ Initial Pressure ] and then
select the appropriate setting.
12.7.2 Setting NIBP Alarm Properties
Select [ Alarm Setup >> ] from the [ NIBP Setup ] menu. You can set the alarm properties for this parameter in the popup
menu.
12.7.3 Displaying NIBP List
Select the [
Screens
] QuickKey
→
[
Screen Setup
]. You can set [
NIBP List
] to be displayed at the bottom area of the screen.
Then, multiple sets of the most recent NIBP measurements will be displayed. PR displayed is derived from NIBP.
You cannot display [ NIBP List ] in some screens such as the big numerics screen.
12.7.4 Setting the Pressure Unit
Select [
Unit Setup >>
] from the [
User Maintenance
] menu. In the popup menu, select [
Press. Unit
] and toggle
between [ mmHg ] and [ kPa ].
12.7.5 Switching On NIBP End Tone
The monitor can issue a reminder tone at the completion of NIBP measurement. The NIBP End Tone is off by default. You
can switch it on by accessing the [
NIBP Setup ] menu.
12.8 Assisting Venous Puncture
You can use the NIBP cuff to cause sub-diastolic pressure to block the venous blood vessel and therefore help venous
puncture.
1. Select [
VeniPuncture >>
] from the [
NIBP Setup
] menu. In the popup menu, verify that the [
Cuff Press.
] value is
appropriate. Change it if necessary.
2. Select [ VeniPuncture ].
3. Puncture vein and draw blood sample.
4. Select the hardkey on the monitor’s front, or the [
Stop All
] QuickKey to deflate the cuff. The cuff deflates
automatically after a set time if you do not deflate it.
During measurement, the NIBP display shows the inflation pressure of the cuff and the remaining time in venous
puncture mode.