Mindray iMEC8 Vet, Руководство оператора

Страница: 32 / 202

3-4
touchscreen operation is disabled.
3.6 Setting the Screen
You can enter the [ Screen Setup ] window as shown below by selecting [ Main Menu]
→
[ Screen Setup ]
→
[ Screen
Layout >>
]. In this window, you can allocate the positions of the parameters and waveforms. The parameters or
waveforms whose positions are not allocated will not be displayed.
The ECG parameter and the first ECG waveform are always displayed in the first row. The configurable areas can be
classified as Area A, Area B, and Area C.
 In Area A, you can choose to display the parameters (having waveforms) and their waveforms. Each parameter
and the associated waveform are displayed in the same row.

In Area B, you can choose to display the parameters and their waveforms. When there is no parameter displayed
in area C, both the parameters and their waveforms will be displayed in area B. Otherwise, only the parameters
will be displayed.

In Area C, you can choose to display Timer and all the parameters whose associated waveforms will not be
displayed.
The screen can automatically adjust to ensure the best view based on your screen setup.
If no corresponding parameter or waveform is displayed on the monitor screen, you should perform the following
inspections:

Check the connection of the lead, cable, or sensor.

Enter the [
Screen Setup
] window for the desired display configuration.

Check that the parameter is switched on in [ Parameters Switch ] window.
WARNING

The parameters whose positions are not allocated in the [Screen Setup] window will not be displayed.
However, the monitor can still give alarms of these parameters.
Area C
Area B
Area A