Mindray iMEC8 Vet, Руководство оператора

Страница: 37 / 202

3-9
3.12 Operating Modes
Your monitor has different operating modes. Some are password protected. This section lists the major operating
modes.
3.12.1 Monitoring Mode
This is the normal, everyday working mode that you use for monitoring patients. Your monitor automatically enters
the monitoring mode after being turned on.
3.12.2 Night Mode
To avoid disturbing the patient, night mode may be used.
To activate the night mode:
1. Select [ Main Menu ]
→
[ Screen Setup >> ]
→
[ Night Mode >> ].
2. In the pop-up menu, set the desired brightness, alarm volume, QRS volume, key volume, NIBP end tone, or
whether to stop NIBP measurement or not. When [
Stop NIBP
] is selected, all the NIBP measurements terminate
after entering the night mode.
3. Select the [ Enter Night Mode ] button.
To cancel the night mode:
1. Select [
Main Menu
]
→
[
Screen Setup >>
]
→
[
Night Mode >>
].
2. Select [
Ok
] in the popup.
WARNING

Before entering night mode, confirm the settings of brightness, alarm volume, QRS volume, and key
volume. Pay attention to the potential risk when the setting value is a bit low.
3.12.3 Privacy Mode
Privacy mode is only available when a patient who is admitted at a monitor is also monitored by the central station.
To activate the privacy mode, select [
Main Menu ]
→
[ Screen Setup >> ]
→
[ Privacy Mode ].
The monitor behaves as follows as soon as the privacy mode is activated:

The screen turns blank and [ Under monitoring. Press any key to exit the privacy mode. ] is displayed.

Monitoring and data storing continue but patient data is only visible at the central station.

Alarms can still be triggered. But all audible alarms are suppressed and the alarm light is deactivated at the
monitor.
 All system sounds are suppressed, including heart beat tone, pulse tone, all prompt tones, etc.