Mindray iMEC8 Vet, Руководство оператора

Страница: 49 / 202

6-1
6
User Screens
6.1 Tailoring Your Screens
You can tailor your monitor’s screens by setting:

Wave line size

The color in which each measurement’s numerics and waveform are displayed

The parameter to be monitored.
Changing some settings may be hazardous. Therefore, those settings are password-protected and can be modified by
authorized personnel only. Once a change is made, those who use the monitor should be notified.
6.1.1 Changing the Wave Line Size
1. Select [
Main Menu
]
→
[
Maintenance >>
]
→
[
User Maintenance >>
]
→
enter the required password.
2. Select [
Others >>
].
3. Select [
Wave Line
] and toggle between [
Thick
], [
Mediate
] and [
Thin
].
6.1.2 Changing Measurement Colors
1. Select [
Main Menu
]
→
[
Screen Setup >>
]
→
[
Measurement Color Setup >>
].
2. Select the color box next to your desired measurement and then select a color from the popup menu.
6.1.3 Changing Screen Layout
Select the [
Screens
] QuickKey, or [
Main Menu
]
→
[
Screen Setup >>
]
→
[
Screen Layout >>
] to enter the [
Screens
] menu.

You can choose the desired screen type in the [ Choose Screen ] window.

You can select the parameters and waveforms you want to view in the [ Screen Setup ] window. For details, please
refer to the section
Setting the Screen
.
 You can select the parameters you want to view on the big numerics screen in the [
Big Numerics Screen Setup
]
window.

You can switch on or off the connected parameter modules in the [ Parameters Switch ] window. If a parameter
module is switched off, parameter values and waveforms will not display on the screen.
6.2 Viewing Minitrends
6.2.1 Having a Split-Screen View of Minitrends
You can split the normal screen so that one part of the screen, on the left hand side, continuously shows graphic
minitrends beside waveforms as shown in the figure below.