Mindray iMEC8 Vet, Руководство оператора

Страница: 188 / 202

D-2
Measurement Alarm Messages L Cause and Solution
Brady M*
Missed Beats M*
Irr. Rhythm M*
Vent. Rhythm M*
Multif. PVC M*
Nonsus. Vtac M*
Pause M*
PNP M*
The pacer appears abnormal. Check the pacer.
PNC M*
Resp
Resp Apnea H
The respiration signal was so weak that the monitor cannot perform
respiration analysis. Check the patient’s condition and the Resp
connections.
Resp Artifact H
The patient’s heartbeat has interfered with his respiration. Check the
patient’s condition and the Resp connections.
SpO
2
SpO
2
Desat H
The SpO2 value has fallen below the desaturation alarm limit. Check
the patient’s condition and check if the alarm limit settings are
correct.
No Pulse H
The pulse signal was so weak that the monitor cannot perform pulse
analysis. Check the patient’s condition, SpO
2
sensor and
measurement site.
CO
2
CO
2
Apnea H
The patient stops breathing, or the respiration signal was so weak
that the monitor cannot perform respiration analysis. Check the
patient’s condition and the RM connections.
D.2 Technical Alarm Messages
Measurement Alarm Message L I Cause and Solution
XX XX SelfTest Err H C An error occurred to the XX module, or there is a problem with
the communications between the module and the monitor.
Re-plug the module and restart the monitor, or plug the
module into another monitor.
XX Init Err H A
XX Init Err N H A
N is within 1 to 8
XX Comm Err
H A
XX Comm Stop H C
XX Limit Err L C XX parameter limit is accidentally changed. Contact your
service personnel.
XX Overrange L C The measured XX value is not within the specified range for XX
measurement. Contact your service personnel.
ECG ECG Lead Off L* B The electrode has become detached from the patient or the
lead wire has become disconnected from the adapter cable.
Check the connections of the electrodes and leadwires.
ECG YY Lead Off L* B
Note: YY represents the leadwires, V,
LL, LA, RA, as per AHA standard, or C,
F, L and R as per IEC standard.