Mindray iMEC8 Vet, Руководство оператора

Страница: 43 / 202

4-5
4.7.2 Transferring Data from a USB Drive to the Monitor
1. Connect the USB drive to the destination monitor.
2. In the popup menu, you can:

Select [ Transfer ] to transfer the patient data to the monitor, or

Select [ Cancel Transfer ] to cancel the operation of transferring patient data.

Select [ Unload USB Drive ] to not transfer the patient data and to unload the USB drive.
3. After you select [ Transfer ], in the popup menu you can further select the patient data contents that need to be
transferred. [
Patient Demographics
] must be selected. After [
Ok
] is selected, the monitor compares the patient
information stored in both the storage medium and monitor and deals with the patient data based on the
following.

Different Patients:
The monitor erases all the current patient data, transfers the patient data
from the storage medium, and loads the configuration according to the
patient category.

Same Patient:
In the popup dialog box, you can:
 Select [ Yes ] to merge the patient data in the monitor and storage
medium.

Select [
No
] to erase all the current patient data in the monitor and to
transfer the patient data from the storage medium.
4. Wait until the following message appears: [ Transfer from storage medium successful. ].
WARNING

The USB drive you use may have a write-protect function. In this case, please make sure the USB drive for
data transfer is in read/write mode.

Do not discharge a patient before the patient is successfully transferred.

Do not remove the storage medium during the data transfer process. Otherwise, data files may be damaged.

After a patient is successfully transferred, check if the patient settings (especially patient category, paced
status and alarm limits settings, etc) on the monitor are appropriate for this patient.
NOTE

The system automatically switches on the HR alarm and lethal arrhythmia alarm after transferring the
patient data.