Mindray iMEC8 Vet, Руководство оператора

Страница: 135 / 202

19-3
19.4.4 Setting the Interval between Timed Recordings
Timed recordings start automatically at preset intervals. Each recording lasts 8 seconds. To set the interval between
timed recordings: in the [
Record Setup
] menu, select [
Interval
] and then select the appropriate setting.
19.4.5 Changing the Recording Speed
In the [ Record Setup ] menu, select [ Paper Speed ] and toggle between [ 25 mm/s ] and [ 50 mm/s ]. This setting is for all
recordings containing waveforms.
19.4.6 Clearing Recording Tasks
In the [
Record Setup
] menu, select [
Clear All Tasks
]. All queued recording tasks are cleared and the current recording is
stopped.
19.5 Loading Paper
1. Use the latch at the upper right of the recorder door to pull the door open.
2. Insert a new roll into the compartment as shown below.
3. Close the recorder door.
4. Check if paper is loaded correctly and the paper end is feeding from the top.
CAUTION

Use only specified thermal paper. Otherwise, it may cause damage to the recorder’s printhead, the recorder
may be unable to print, or poor print quality may result.

Never pull the recorder paper with force when a recording is in process. Otherwise, it may cause damage to
the recorder.

Do not leave the recorder door open unless you reload paper or remove troubles.
Paper roll