Mindray iMEC8 Vet, Руководство оператора

Страница: 141 / 202

21-1
21
Batteries
21.1 Overview
This monitor is designed to operate on rechargeable Lithium-ion battery power during intra-hospital patient transfer
or whenever the power supply is interrupted. The battery is charged automatically when the monitor is connected to
AC power, no matter the monitor is powered on or not. Whenever the AC power is interrupted during monitoring, the
monitor will automatically run power from the internal batteries.
On-screen battery symbols indicate the battery status as follows:

Indicates that the battery works correctly. The solid portion represents the current charge level of the
battery in proportion to its maximum charge level.
 Indicates that the battery has low charge level and needs to be charged. In this case, the monitor provides
an alarm message.

Indicates that the battery is almost depleted and needs to be charged immediately. Otherwise, the
monitor will shut down automatically.

Indicates that no battery is installed.
The capacity of the internal battery is limited. If the battery charge is too low, a technical alarm will be triggered and
the message [] or [] displayed. At this moment, apply AC power to the monitor. Otherwise, the monitor will power off
automatically before the battery is completely depleted.
21.2 Replacing a Battery
When the monitor operates on battery power, make sure the monitor is power off before replacing a battery. To
replace a battery, follow this procedure:
1. Open the battery door.
2. Push aside the latch fixing the battery to be replaced and remove the battery.
3. Insert a battery into the slot with its contact point inward.
4. Close the battery door.
Pull here to open
the battery door