Mindray iMEC8 Vet, Руководство оператора

Страница: 134 / 202

19-2
19.3 Starting and Stopping Recordings
To manually start a recording, you can either:

Select the hardkey on the front of either the monitor or the recorder module, or

Select the [ Record ] button from the current menu or window.
Automatic recordings will be triggered in the following conditions:

Timed recordings will start automatically at preset intervals.
 If both [
Alarm
] and [
Alm Rec
] for a measurement are set on, an alarm recording will be triggered automatically as
alarms occur.
To manually stop a recording, you can either:
 Select the hardkey again, or
 Select [
Clear All Tasks
] in the [
Record Setup
] menu.
Recordings stop automatically when:

A recording is completed.

The recorder runs out of paper.

When the recorder has an alarm condition.
When a recording is stopped, the following markers will be added:

Automatically stopped recording: print two columns of ‘*’ at the end of the report.
 Manually or abnormally stopped recording: print one column of ‘*’ at the end of the report.
19.4 Setting up the Recorder
19.4.1 Accessing the Record Setup Menu
By selecting [
Main Menu
]
→
[
Record Setup >>
], you can access the [
Record Setup
] menu.
19.4.2 Selecting Waveforms for Recording
The recorder can record up to 3 waveforms at a time. You can select, in turn, [ Waveform 1 ], [ Waveform 2 ] and
[
Waveform 3
] in the [
Record Setup
] menu, and then select the waveforms you want. You can also turn off a waveform
recording by selecting [ Off ]. These settings are intended for realtime and scheduled recordings.
19.4.3 Setting the Realtime Recording Length
After starting a realtime recording, the recording time depends on your monitor’s settings. In the [
Record Setup
] menu,
select [ Length ] and toggle between [ 8 s ] and [ Continuous ].

[ 8 s ]: record 4-second waveforms respectively before and after current moment.

[ Continuous ]: record the waveforms from the current moment until stopped manually.