Mindray iMEC8 Vet, Руководство оператора

Страница: 47 / 202

5-3
5.6 Deleting a Configuration
1. Select [ Delete Config. >> ] in the [ Manage Configuration ] menu.
2. The popup menu shows the existing user configurations on the monitor. Selecting [ Config. on USB drive >> ] will
show the existing user configurations on the USB drive. Select the user configurations you want to delete and then
select [
Delete ].
3. Select [ Yes ] in the popup.
5.7 Transferring a Configuration
When installing several monitors with identical user configurations, it is not necessary to set each unit separately. A USB
drive may be used to transfer the configuration from monitor to monitor.
To export the current monitor’s configuration:
1. Connect the USB drive to the monitor’s USB port.
2. Select [
Export Config. >>
] in the [
Manage Configuration
] menu.
3. In the [ Export Config. ] menu, select the configurations and [ User Maintenance Settings ] to export. Then select
the [ Export ] button. A status message will report completion of the transfer.
To import the configuration on the USB drive to the monitor:
1. Connect the USB drive to the monitor’s USB port.
2. Select [ Import Config. >> ] in the [ Manage Configuration ] menu.
3. In the [ Import Config. ] menu, select the configurations and [ User Maintenance Settings ] to import. Then select
the [
Import
] button. A status message will report completion of the transfer.
5.8 Loading a Configuration
You may make changes to some settings during operation. However, these changes or the pre-selected configuration
may not be appropriate for the newly admitted patient. Therefore, the monitor allows you to load a desired
configuration so as to ensure that all the settings are appropriate for your patient.
To load a configuration,
1. Select [
Load Configuration >>
] from the main menu.
2. The popup menu shows the existing configurations on the monitor. Selecting [
Config. on USB drive >>
] will show
the existing configurations on the USB drive.
3. Select a desired configuration.
4. Select [ View ] to view the configuration details. In the popup menu, you can select [ Alarm Setup >> ], [ Screen
Setup >>
] or [
Parameter >>
] to view the corresponding contents. The alarm setup items which are different than
those currently used are marked in red.
5. Select [ Load ] to load this configuration.